Volume 3, Issue 6, December 2018, Page: 58-65
Regulatory Management in California Oil & Gas Underground Injection Control Operations
Yu Bingsen, College of Petroleum Engineering, Xi’an Shiyou University, Xi’an, China
Yuan Shibao, College of Petroleum Engineering, Xi’an Shiyou University, Xi’an, China
Su Zezhong, College of Petroleum Engineering, Xi’an Shiyou University, Xi’an, China
Received: Dec. 27, 2018;       Accepted: Jan. 20, 2019;       Published: Feb. 18, 2019
DOI: 10.11648/j.ijeee.20180306.11      View  111      Downloads  24
Abstract
Chinese oil & gas companies have not paid attention to the fluid injected into the reservoir that causes the loss of mineral resources and pollution in the environment. Underground injection control regulation is lacking in China. A foreign country’s related experience in regulation and commissioning methods would be able to expedite the regulatory process. The California Division Oil & Gas regulatory agency is currently using underground control regulations to manage all its properties: the underground control evaluation process, aquifer exemption, area of review, injection project monitoring, testing & reporting and publicizing injection project information. In order to stabilize oil & gas production in China, the country will need to establish a new management method. The provincial government should legislate underground injection control regulations, establish a regulatory agency, and publicize the data information. Only then will China be able to protect its mineral resources and the environment.
Keywords
Underground Injection Projects, Protect the Mineral Resources, Regulatory Commission, Legislate Underground Injection Control Regulations
To cite this article
Yu Bingsen, Yuan Shibao, Su Zezhong, Regulatory Management in California Oil & Gas Underground Injection Control Operations, International Journal of Economy, Energy and Environment. Vol. 3, No. 6, 2018, pp. 58-65. doi: 10.11648/j.ijeee.20180306.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
California Oil & Gas Laws and Regulations [S], PRC 10, 2018.
[2]
EPA Underground Injection Control (UIC) “Class II oil and Gas Related Injection Wells”, Section 1422 or 1425 of SDWA, 1986. https://www.epa.gov/uic/class-ii-oil-and-gas-related-injection-wells
[3]
EPA Clean Water Act (CWA), 1972. https://www.epa.gov/laws-regulations/history-clean-water-act
[4]
EPA Safe Drinking Water Act (SDWA), 1986 https://www.epa.gov/sdwa
[5]
40 CFR Part 146-Underground Injection Control Program: Criteria and Standards. Safe Drinking Water Act [S].
[6]
Earlougher R. C. Advances in Well Test Analysis, SPE Monograph 5, 1977
[7]
Lee J. Well Testing [S]. SPE Textbook Series Vol.1, 1982.
[8]
Small G. P. Steam-injection Profile Control Using Limited Entry Perforations [R]. SPE 13607, 1986.
[9]
Zhou Shaylin. Petroleum and petrochemical waste-water treatment technology and engineering examples [M]. Beijing, China petrochemical press, 2013:188.
[10]
[10] California Oil & Gas Felds, Central California (Vol. 1), CA Department of Conservation, Division of oil & Gas, Sacramento, 1985.
Browse journals by subject